WILLKOMMEN AUF UNSEREM BLOG

Wir teilen Wissen in den Bereichen, die uns am meisten faszinieren.
click

What 150kg Load and 0.01mm Accuracy Mean for MR40G Modules

Durch knkmotion November 13th, 2026 18 Aufrufe

Introduction: Early in a project, an automation engineer needs a practical way to read the MR40G's published 150kg load, 1000mm/s speed, and 0.01mm positioning accuracy.

These are nominal specifications, not guarantees. The goal is to decide whether the module merits a closer technical review and what to confirm before the values enter a design. Picture a mechanical engineer at a desk with a preliminary machine layout, comparing linear module options before any drawing is released. The MR40G appears with three headline figures: 150kg maximum load, 1000mm/s maximum speed, and 0.01mm positioning accuracy. Each figure describes a published limit or value, while the machine will run under its own load, motion profile, and measurement conditions. Treat each number as the start of a question: What load direction applies? What acceleration and duty cycle will the axis see? How is positioning accuracy defined?

What 150kg Load Means Before It Becomes a Selection Figure

A maximum load figure is a ceiling. For the ballscrew series MR40G, the published 150kg is the load level the module is rated for, and the rated condition is worth checking with the linear module manufacturer. The moving load in a real machine is rarely a single centered mass. It includes the tooling, fixture, part being moved, and any cable management traveling with the carriage. Their position relative to the carriage changes the moment load on the guide system. Sketch the actual load case before returning to the catalog number. Mark the center of gravity of the moving assembly, whether it sits above or to the side of the carriage, and the direction of travel. A heavy fixture hanging off the end of a cantilever asks more of the guide than a centered horizontal load. The product information describes the closed ballscrew design as helping limit contaminants and lower maintenance need. If the design depends on an IP rating or a maintenance interval, request those details separately. The load case comes first. Compare the actual moving mass and center of gravity with the published 150kg, then discuss moment load and speed at that load with the linear module supplier. If the design load is close to 150kg, or if the center of gravity is far from the carriage, make moment load and the speed-load relationship the next technical questions. These questions turn the headline figure into a design input.

How Speed and Accuracy Interact in Real Motion Tasks

Speed and accuracy never act alone in a machine axis. The published 1000mm/s is the top speed the MR40G can reach, and the design question is whether the module can reach that speed with the actual load, required acceleration, and target tolerance. Four factors shape how the published speed and accuracy behave in a real motion task.

  1. Acceleration — Reaching 1000mm/s from a standing start takes time and travel, and acceleration depends on moving mass. Short moves spend most of their distance accelerating and decelerating, so the real top speed stays below the published figure. A heavier payload lowers achievable acceleration and changes the speed profile the machine can run.
  2. Duty cycle — Continuous high-speed motion keeps the ballscrew working and warming, which can shift running clearance and positioning behavior over a shift. A low-duty-cycle machine can use peak speed without holding it for hours. Match the working cycle to the speed figure instead of treating 1000mm/s as an everyday value.
  3. Mounting stiffness — The linear module mounts to a frame or gantry, and the whole assembly deflects under moving load. A stiff module on a soft mounting surface still lets the tool move relative to the workpiece. Check mounting-surface flatness, bolt pattern, and structural stiffness before finalizing the accuracy assumption.
  4. Measurement setup — The test conditions behind the 0.01mm positioning accuracy figure shape what the number means in practice. Encoder position and carriage position are different points. Confirm the measurement speed, load, and stroke length, then apply the figure only to comparable conditions.

Those four factors work as a set. Published speed, load, and accuracy describe the module under specific conditions, and a real machine introduces its own conditions. Until the speed-load relationship, mounting requirements, and accuracy test description arrive, the three headline figures are inputs for the next technical conversation, not final working values.

How Positioning Accuracy Should Be Interpreted for Project Screening

Positioning accuracy and repeat positioning accuracy describe different performance. Positioning accuracy describes how close the carriage comes to the commanded position on a move. Repeat positioning accuracy describes how consistently the carriage returns to the same position over many cycles. The MR40G figure of 0.01mm is a positioning accuracy value. Repeat positioning accuracy is a separate specification the supplier can clarify for the project. For early screening, 0.01mm tells an engineer that the MR40G is worth evaluating for medium-precision positioning tasks such as assembly placement, feeding position, or indexing stations on a packaging line. It is a module-level starting point. The frame, fixture, tool deflection, and temperature all add error on top of the module's contribution. Ask how the accuracy is defined, over what stroke range it applies, and whether the measurement uses a one-directional or bidirectional approach. Measurement results carry uncertainty, and an assembled machine adds further error sources. Those answers let the engineer allocate the remaining error budget across the frame, fixture, tool, and process.

Conclusion

The 150kg load, 1000mm/s speed, and 0.01mm positioning accuracy are the figures that put the MR40G on an early screening shortlist. They identify a ballscrew series linear module for medium-to-heavy load and medium-precision positioning work, where a focused technical conversation is worthwhile. Before design release, confirm load direction, the speed-load relationship, acceleration limits, duty cycle, and the accuracy definition with the supplier. Send knkmotion the moving mass, center of gravity, stroke, speed profile, and target accuracy to get a more precise answer and a concrete MR40G configuration for the next design review. Custom linear module options can be discussed once the project reaches the drawing stage, and the published figures are a sensible starting point for that exchange.

FAQ

Q: Can the MR40G 150kg load figure be used directly for dynamic load calculations?

A: The 150kg figure is the nominal maximum load. Dynamic calculations need moving mass, center of gravity, direction of travel, acceleration, guide friction, and speed profile along the stroke. Use 150kg as the ceiling, ask for the rated condition and load-speed relationship, then run the calculation against the real working values.

Q: Does 0.01mm positioning accuracy mean the same as repeat positioning accuracy?

A: No. Positioning accuracy describes how close the module gets to the commanded position on a move. Repeat positioning accuracy describes how consistently it returns to the same position over many cycles. The MR40G 0.01mm is a positioning accuracy figure. Ask for repeat positioning accuracy separately if consistent return-to-position behavior matters to the application.

Q: What test conditions is worth checking before using the 1000mm/s speed in a design?

A: Confirm the load at which speed was measured, stroke length, acceleration profile, duty cycle, motor and drive combination, and mounting orientation. The 1000mm/s figure may apply to a light load, low duty cycle, or long stroke. Ask for the speed-load curve and a sample motion profile so the figure becomes a design decision.

Sources / References

Uncertainty of Measurement Results from NIST

SI Units | NIST

Advertising FAQ's: A Guide for Small Business | Federal Trade Commission

knkmotion MR40G product information

Eine Nachricht hinterlassen
Ihr Name
Kontaktinformationen*
Name der Firma*
Inhalt
Bitte geben Sie den Inhalt Ihrer Anfrage ein.